Safire Scientific Company

• Incorporated with Advanced Microcontroller.
• Alphanumeric display and user friendly feather touch keypad.
• Equipped with inbuilt validation facility.
• Non-volatile memory for storage of 24 test methods’ data.
• Informative help prompt messages displayed, to guide user while conducting test.
• Updated test status displayed.
• Calculates Bulk Density, Tapped Density, Compressibility Index and Hausner Ratio
• Simultaneous action of rotating and tapping of the cylinders.
• Supports USP – I and USP – II. ASTM method (Available Optionally)
• Print format as per GLP requirements.

• Tap Setting Range: 1 – 9999 Taps
• Tap Cylinder Drive: Stepper Motor Driven
• Display: 20 x 4 Lines, Wide Angle, Alphanumeric Backlit LCD
• Key Board: 4 x 4 Matrix Feather Touch Key Board
• Parallel Port Printer Interface for Dot Matrix Printer
• Compliant with USP Specifications:
• Power Supply: 230 ± 10 V AC, 50/60 Hz, 2 Amps Max.
• Dimensions (cm): 36 x 26 x 36
• Weight: Nett — 17 Kg. Gross — 25 kg (Approx.)

• Pharmaceutical and Bulk Drug Industry
• Food Industry
• Packaging Industry
• Granules and Flakes Manufacturing Industry

• Microcontroller Based Titrator suitable for accurate estimation of moisture.
• Incorporated with maintenance free metering pump.
• Valve-less Dispenser eliminates the need of cumbersome piston burette.
• No Refilling is necessary after every titration.
• Several titrations can be carried out uninterruptedly.
• Supports both Water and DST method for factor determination.
• Automatic Calculations of Factor and Results.
• Results in Percentage, PPM and mg of H2O.
• Drift Control: Automatic Drift Compensation.
• Password protection facility provided.
• Equipped with inbuilt volume validation facility.
• RS 232 serial port for balance and PC interface.

• Method: Volumetric Titration.
• Water content measuring range: 50 PPM to 100% Drift Compensation: Automatic.
• End Point Confirmation Time: 20 sec. Fixed.
• Dispensing resolution: 0.01 ml.
• Memory Storage: 100 Test Methods (User Programmable).
• PC Interface: RS 232 Serial Port.
• Display: Back Lit Graphic 240 x 64 LCD Display.
• Input: 4 x 4 Feather touch membrane keyboard.
• Printer: Parallel Interface for 80 Columns Dot Matrix Printer.
• Dimensions: 40 x 35 x 33 cm.
• Weight: 15 kg approx.
• Power Supply: 230 ± 10V AC.

Features:

• Combined Titrator for Potentiometric & Karl Fischer titrations pH titrations
• Titration Modes: Potentiometric, Karl Fischer and pH
• Measuring pH range 0 -14 pH.
• Supports both Water and DST method for Factor determination.
• Results in Percentage, PPM and mg of H2O.
• Wide Range of Moisture Detection; 50 PPM to 100%.
• Instrument suitable for Potentiometric titrations.
• Suitable for TAN /TBN titrations as per various ASTM Methods.
• Incorporated with maintenance free metering pump.
• Valve less Dispenser suitable to handle various titrants.
• Titrant can be changed within no time.
• Cumbersome Piston Burette is eliminated for ease of operation.
• Several titrations can be carried out without the need of refilling the titrant
• Eliminates the need of separate dispenser for different titrants.
• Single, Double and Multi Peak (up to 10) Titration facility.
• Memory storage for 100 test methods’ data.
• Password protection facility provided.
• Backlit Graphic Display